Stokka Brannteknikk

JEM ZR45

JEM ZR45

The JEM™ ZR45 is a high-end fog machine designed to deliver superior and uninterrupted performance in demanding professional applications. Via its enhanced and powerful 2,000 W heat exchanger, the JEM ZR45 produces an exceptional peak output ideal for major venues and stages in both install and rental markets.
The rugged yet weight-optimized JEM ZR45 also features variable output control for more subtle effects and is fully up-to-date with digital remote, DMX and RDM.
The entire JEM ZR range is compatible with a wide range of JEM Pro fog fluids. As machines designed and built to last, the JEM ZRs will continue to perform with great output and low consumption. 

  • High endurance high-end fog machine
  • Exceptional performance and output
  • Various control options via digital remote, DMX and RDM
  • 2,000 W (EU model) / 1,800 W (US model) heat exchanger
  • 80 ml in 30 seconds peak performance
  • 1300 m³/min fog output
  • Variable output control for subtle effects
  • 9-10 minute warm-up time
  • Digital remote, DMX and RDM
  • Compatible with a wide range of JEM Pro fog fluids
  • Floor standing or truss mounting (bracket included)
  • PowerCON TRUE1
  • 5-liter bottle
PhysicalLength: 602 mm (23.1 in.)Width: 395 mm (15.6 in.)Height: 306 mm (12.1 in.)Height including hanging bracket: 393 mm (15.5 in.)Weight, dry: 17.7 kg (39.1 lb.)Weight, filled: 22.7 kg (50 lbs.)
PerformanceCoverage volume: 1300 m3 (45,909 ft3) per minuteFluid consumption (max.): 210 ml per minuteContinuous effect outputReady time: 10 minutes
Control and ProgrammingControl options: Integrated digital remote control, DMX, optional analog remote control, master/slave link mode, PLC (0-10V)Control parameters: Continuous or timer-controlled outputFog: Variable output control, 0-100%DMX channels: 1DMX compliance: ANSI E1.11 - USITT DMX512-ARDM compliance: ANSI/ESTA E1.20 RDM
ConstructionHousing: Steel and aluminumHanging bracket: Integrated yoke w/safety attachment pointColor: BlackHeat exchanger (US model): 1800 W, thermally protectedHeat exchanger (EU model): 2000 W, thermally protectedFluid pump: Dual oscillating piston, high pressureFluid management: Fluid out sensing, sealed for transportationFluid reservoir: 5 l drop-in reservoir with quick-connect fittingExternal fluid control: Fluid sensingRemote control: Integrated Digital Remote with 3 m cable, 3-pin XLR
InstallationMounting: Standing or hangingOrientation: Up to +/- 40° from horizontalClearance around machine: 100 mm (4 in.)
ConnectionsAC Power: Neutrik PowerCON TRUE1DMX, link mode in/out: 5-pin locking XLRRemote control: 3-pin locking XLRFirmware: AVR socket
ElectricalEU modelAC power: 220-240 V nominal, 50/60 HzMain fuse: 12.5 AT (slow blow), 250 VTypical power and current: 2100 W, 9.2 A*US modelAC power: 100-130 V nominal, 50/60 HzMain fuse: 20 AT (slow blow), 125 VTypical power and current: 1800 W, 15 A**Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
ThermalMaximum ambient temperature (Ta max.): 40° C (104° F)Exterior surface temperature, steady state: 30° C (86° F)Max. nozzle temperature: 290° C (554° F)Minimum ambient temperature (Ta min.): 5° C (41° F)
ApprovalsEU modelEU safety: EN 60335-1+A15, EN 62233EU EMC: EN 61000-6-3EU immunity: EN 61000-6-1Australia/NZ (pending): RCMUS modelUS safety: UL 998Canadian safety: CSA C22.2 No. 104.01
Included ItemsFluid reservoir, 5 l: P/N 34300506JEM™ ZR Series Digital Remote Control: P/N 92765048Power input cable, EU, powerCON TRUE1, stripped ends, 3 m (9.8 ft.): P/N 11501043Power input cable, US, 20A, powerCON TRUE1, molded NEMA 5-20P, 2 m (6.6 ft.): P/N 11501046
AccessoriesJEM™ ZR45 Ducting System with 5 m (16.4 ft.) ducting: P/N 92625014JEM™ ZR Series PLC Interface: P/N 92765049Mains power input cablesPower input cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F, UL, VDE, with PowerCON TRUE1 NAC3FX-W connector, 1.5 m (4.9 ft.): P/N 11541513Power ConnectorsCable connector, PowerCON TRUE1 NAC3FX-W, 16 A, female: P/N 05323416Cable connector, PowerCON TRUE1 NAC3MX-W, 16 A, male: P/N 05343418Approved fluidsJEM™ Pro Smoke StudioJEM™ Pro Smoke SuperJEM™ Pro Smoke High DensityJEM™ I-Fog FluidJEM™ Pro Steam SimulationJEM™ Pro Clean SupremeVarious sizes available - contact your dealer or see 'Fluids' product pages for detailsInstallation hardwareG-clamp: P/N 91602003Half-coupler clamp: P/N 91602005Quick trigger clamp: P/N 91602007Service toolsEpsilon 5 AVR Programmer: P/N 50502004Temperature Calibration Box: P/N 92620005
Del denne siden med andre!

Share on FacebookShare on Twitter