Stokka Brannteknikk


The JEM™ ZR35 is a mid-sized fog machine designed to deliver superior and uninterrupted performance in demanding professional applications. Via its powerful 1,500 W heat exchanger, the JEM ZR35 produces a fantastic peak output ideal for mid to large-sized venues and stages in both install and rental markets.
The rugged yet weight optimized JEM ZR35 also features variable output control for more subtle effects and is fully up-to-date with digital remote, DMX and RDM.
The entire JEM ZR range is compatible with a wide range of JEM Pro fog fluids. As machines designed and built to last, the JEM ZRs will continue to perform with great output and low consumption. 

  • High endurance mid-sized fog machine
  • Exceptional performance and output
  • Various control options via digital remote, DMX and RDM
  • 1,500 W heat exchanger
  • 50 ml in 30 seconds peak performance
  • 800 m³/min fog output
  • Variable output control for subtle effects
  • 8-9 minute warm-up time
  • Digital remote, DMX and RDM
  • Compatible with a wide range of JEM Pro fog fluids
  • Floor standing or truss mounting (bracket included)
  • PowerCON TRUE1
  • 4-liter bottle (Also compatible with a 5-liter bottle)
PhysicalLength: 590 mm (23.3 in.)Width: 395 mm (15.6 in.)Height: 264 mm (10.4 in.)Height including hanging bracket: 333 mm (13.9 in.)Weight, dry: 15.1 kg (33.3 lbs.)Weight, filled: 19.1 kg (42.1 lbs.)
PerformanceCoverage volume: 800 m3 (28,252 ft3) per minuteFluid consumption (max.): 140 ml per minuteContinuous effect outputReady time: 9 minutes
Control and ProgrammingControl options: Integrated digital remote control, DMX, optional analog remote control, master/slave link mode, PLC (0-10V)Control parameters: Continuous or timer-controlled outputFog: Variable output control, 0-100%DMX channels: 1DMX compliance: ANSI E1.11 - USITT DMX512-ARDM compliance: ANSI/ESTA E1.20 RDM
ConstructionHousing: Steel and aluminumHanging bracket: Integrated yoke with safety attachment pointColor: BlackHeat exchanger: 1500 W, thermally protectedFluid pump: Oscillating piston, high pressureFluid management: Fluid out sensing, sealed for transportationFluid reservoir: 4 or 5 l drop-in reservoir with quick-connect fittingExternal fluid control: Fluid sensingRemote control: Integrated Digital Remote with 3 m cable, 3-pin XLR
InstallationMounting: Standing or hangingOrientation: Up to +/- 40° from horizontalClearance around machine: 100 mm (4 in.)
ConnectionsAC Power: Neutrik powerCON TRUE1DMX and link mode in/out: 5-pin locking XLRRemote control: 3-pin locking XLRFirmware: AVR socket
ElectricalEU modelAC power: 220-240 V nominal, 50/60 HzMain fuse: 10 AT (slow blow), 250 VTypical power consumption: 1500 W, 6.8 A*US modelAC power: 100-130 V nominal, 50/60 HzMain fuse: 15 AT (slow blow), 125 VTypical power consumption: 1450 W, 12.1 A**Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
ThermalMaximum ambient temperature (Ta max.): 40° C (104° F)Exterior surface temperature, steady state: 30° C (86° F)Max. nozzle temperature: 290° C (554° F)Minimum ambient temperature (Ta min.): 5° C (41° F)
ApprovalsEU modelEU safety: EN 60335-1+A15, EN 62233EU EMC: EN 61000-6-3EU immunity: EN 61000-6-1Australia/NZ (pending): RCMUS modelUS safety: UL 998Canadian safety: CSA C.22.2 No. 104.01
Included ItemsFluid reservoir, 4 l: P/N 34300523JEM™ ZR Series Digital Remote Control: P/N 92765048Power input cable, EU, PowerCON TRUE 1, stripped ends, 3 m (9.8 ft.): P/N 11501043Power input cable, US, 15A, PowerCON TRUE1, molded NEMA 5-15P, 3 m (9.8 ft.): P/N 11501045
AccessoriesJEM™ ZR35 Ducting System with 5 m (16.4 ft.) ducting: P/N 92625013JEM™ ZR Series PLC Interface: P/N 92765049Power relay cablesPower relay cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F, UL, VDE, PowerCON TRUE1 in/out connectors, 0.7 m (2.3 ft.): P/N 11541514Power relay cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F, UL, VDE, PowerCON TRUE1 in/out connectors, 1.5 m (4.9 ft.): P/N 11541512Power relay cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F, UL, VDE, PowerCON TRUE1 in/out connectors, 3.25 m (10.7 ft.): P/N 11541511Power ConnectorsCable connector, PowerCON TRUE1 NAC3FX-W, 16 A, female: P/N 05323416Cable connector, PowerCON TRUE1 NAC3MX-W, 16 A, male: P/N 05343418Approved fluidsJEM™ Pro Smoke StudioJEM™ Pro Smoke SuperJEM™ Pro Smoke High DensityJEM™ I-Fog FluidJEM™ Pro Clean SupremeVarious sizes available - contact your dealer or see 'Fluids' product pages for detailsInstallation hardwareG-clamp: P/N 91602003Half-coupler clamp: P/N 91602005Quick trigger clamp: P/N 91602007Service toolsEpsilon 5 AVR Programmer: P/N 50502004Temperature Calibration Box: P/N 92620005
Del denne siden med andre!

Share on FacebookShare on Twitter