Length: 485 mm (19.1 in.)Width: 335 mm (13.2 in.)Height: 242 mm (9.6 in.)Height with hanging bracket: 333 mm (13.2 in.)Weight, dry: 11.2 kg (24.7 lbs.)Weight, filled: 13.7 kg (30.2 lbs.)
Coverage volume: 600 m3 (21,189 ft3) per minuteFluid consumption (max.): 100 ml per minuteContinuous effect outputReady time: 7 minutes
Control options: Integrated digital remote control, DMX, optional analog remote control, master/slave link mode, PLC (0-10V)Control parameters: Continuous or timer-controlled outputFog: Variable output control, 0-100%DMX channels: 1External fluid control: Fluid sensingDMX compliance: ANSI E1.11 - USITT DMX512-ARDM compliance: ANSI/ESTA E1.20 RDM
Housing: Steel and aluminumHanging bracket: Integrated yoke with safety attachment pointColor: BlackHeat exchanger: 1150 W, thermally protectedFluid pump: Oscillating piston, high pressureFluid management: Fluid out sensing, sealed for transportationFluid reservoir: 2.5 l drop-in reservoir with quick-connect fittingExternal fluid control: Fluid sensingRemote control: Integrated digital remote with 3 m cable, 3-pin XLR connector
Mounting: Standing or hangingOrientation: Up to +/-40° from horizontalClearance around machine: 100 mm (4 in.)
AC power: Neutrik PowerCON TRUE1DMX and link mode in/out: 5-pin locking XLRRemote control: 3-pin locking XLRFirmware: AVR socket
EU modelAC power: 220-240 V nominal, 50/60 HzMain fuse: 6.3 AT (slow blow), 250 VTypical power and current: 1200 W, 5.3 A*US modelAC power: 100-130 V nominal, 50/60 HzMain fuse: 10 AT (slow blow), 125 VTypical power and current: 1050 W, 8.8 A*
Maximum ambient temperature (Ta max.): 40° C (104° F)Exterior surface temperature, steady state: 30° C (86° F)Max. nozzle temperature: 290° C (554° F)Minimum ambient temperature (Ta min.): 5° C (41° F)
EU modelEU safety: EN 60 335-1+A15, EN62233EU EMC: EN 61000-6-3EU immunity: EN 61000-6-1Australia/NZ (pending): RCMUS modelUS safety: UL 998Canadian safety: CSA C.22.2 No. 104.01
Fluid reservoir, 2.5 l: P/N 34300521JEM™ ZR Series Digital Remote Control: P/N 92765048Power input cable, EU, PowerCON TRUE1, stripped ends, 3 m (9.8 ft.): P/N 11501043Power input cable, US, 10 A, PowerCON TRUE1, molded NEMA 5-15P, 3 m (9.8 ft.): P/N 11501044
JEM™ ZR25 Ducting System with 5 m (16.4 ft.) ducting: P/N 92625012JEM™ ZR Series PLC Interface: P/N 92765049Power relay cablesPower relay cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F, UL, VDE, PowerCON TRUE1 in/out connectors, 0.7 m (2.3 ft.): P/N 11541514Power relay cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F, UL, VDE, PowerCON TRUE1 in/out connectors, 1.5 m (4.9 ft.): P/N 11541512Power relay cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F, UL, VDE, PowerCON TRUE1 in/out connectors, 3.25 m (10.7 ft.): P/N 11541511Power connectorsCable connector, PowerCON TRUE1 NAC3FX-W, 16 A, female: P/N 05323416Cable connector, PowerCON TRUE1 NAC3MX-W, 16 A, male: P/N 05343418Approved fluidsJEM™ Pro Smoke StudioJEM™ Pro Smoke SuperJEM™ Pro Smoke High DensityJEM™ I-Fog FluidJEM™ Pro Clean SupremeInstallation hardwareG-clamp: P/N 91602003Half-coupler clamp: P/N 91602005Quick trigger clamp: P/N 91602007Service toolsEpsilon 5 AVR Programmer: P/N 50502004Temperature Calibration Box: P/N 92620005