Cygnus CYG4LPIR Wireless Smoke Detector with PIR Sensor
Cygnus lithium smoke detectors have optical smoke sensors. The smoke detectors are an integral part of the system, providing essential detection in and out of working hours on all types of construction projects, in particular, site accommodation units. Optical smoke detectors work using the light scatter principle. The detector activates the alarm when a pre-set threshold of smoke penetrates into the sensing chamber. Detectors come with an 85 decibel sounder.
The new PIR intruder functionality is available on all Cygnus alarms. This additional functionality helps utilise fire, first aid alarms and detectors for intruder activations. This added functionality works with the CYG1-GSM/GPRS control panel that sends users an SMS text alert notification should an intrusion occur. Alerts can also be sent to a third-party monitoring station. The sensors are activated by using the menu settings on the control panel, and if an intruder is to pass the sensor in its activated mode will cause the local alarm to sound.
- Battery powered
- Raises fire alarm when smoke is detected
- Fitted with Apollo S65 Optical Smoke Detector to EN54-7
- No external antenna is required
Detector is Cancelled:
- By pressing and holding the button on any fire call point for at least 5 seconds
- At the control panel
- Timing out after a programmable time (defaults 30 minutes)