Stokka Brannteknikk

Cygnus CYG2/85DBPIR Fire Call Point Alarm 85dB with PIR Sensor

Ta kontakt for pris

Cygnus CYG2/85DBPIR Fire Call Point Alarm 85dB with PIR Sensor

The Cygnus 85 decibel call point alarm operates using a single battery pack and is IP rated, thus suitable for external use. This device has been designed as a standalone alarm unit as well as a radio alarm. These devices are built with a less audible sounder for quieter areas such as operational facilities where a 110 decibel level is inappropriate. The call point is pushed to raise an alarm which will activate alarms around the entire site. Please note that this device does not include a flashing beacon

The new PIR intruder functionality is available on all Cygnus alarms. This additional functionality helps utilise fire, first aid alarms and detectors for intruder activations. This added functionality works with the CYG1-GSM/GPRS control panel that sends users an SMS text alert notification should an intrusion occur. Alerts can also be sent to a third-party monitoring station. The sensors are activated by using the menu settings on the control panel, and if an intruder is to pass the sensor in its activated mode will cause the local alarm to sound.

Key Features:

  • 85 Decibel Sounder
  • IP65 Rated
  • Call Point Operated

Technical Data
Aerial Height 230 (mm)
Aerial Type External Mount
Category 1 YES
Dimensions H265 x W170 x D90 (mm)
Frequency 868MHz
IP Rating IP65
Power Battery Power Pack
Sound Output 85db
Warranty 12 Months
Weight 1.72kg / 3.8lbs
Del denne siden med andre!

Share on FacebookShare on Twitter